SCCM 1810 Client Notification error

Benoit LecoursSCCM2 Comments

We had an issue in one of our clients site where some SCCM Administrator were receiving SCCM 1810 Client Notification error in the console. They informed us that they just upgraded to SCCM 1810 recently. When we tried to initiated a client notification on SCCM 1810, the following error occured : Clearly a missing permission in the security role of the affected users… but which one ? We found our answer in the SCCM 1810 What’s new documentation : A new permission is now required to perform the Client Notification Actions. SCCM 1810 Client Notification error Resolution Here’s how to fix this … Read More

How to use SCCM Dynamic Queries in your Deployment Collections

Stephane FaubertSCCM5 Comments

In this post we will be looking at using SCCM dynamic queries to populate collections in our deployments. As a SCCM administrator, you most likely had to plan out mass deployments to all your servers or workstations or even both. How did you go ahead and populate your collections? Queries? Since the introduction of SCCM 2012, we now have a multitude of options, most notably: Direct membership Queries Include a collection Exclude a collection Chances are, if you are deploying a new software to be part of a baseline for workstations (for example), you will also add it to your task … Read More

Operating System Deployment SCCM 2012 0x80070570 Error

Benoit LecoursOSD, SCCM3 Comments

During an operating system deployment using SCCM 2012, you received the error code 0x80070570 at the beginning of the Task Sequence. Numerous errors and warnings are showing in SMSTS.log : ThreadToResolveAndExecuteTaskSequence failed. Code(0x80070570) Failed to create C:\_SMSTaskSequence (1392) The TSM directories could not be created at this time (80070570) uRet == ERROR_ALREADY_EXISTS, HRESULT=80070570 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,1903) Cause The SCCM 2012 0x80070570 error is translated to : The file or directory is corrupted and unreadable. This issue is completely external to SCCM 2012. If you try to launch the Windows installation from the CDROM, you will get the same error. It’s probable that your computer has … Read More

Windows 10 Error Code 80240020

Benoit LecoursWINDOWS 103 Comments

Windows 10 has just been released, Microsoft is calling it the biggest software update in history. With massive installations at the same time, many users has been reporting errors when upgrading. The most common error is Windows 10 error code 80240020.  Microsoft explains this error in the following statement: This is an expected message indicating that when installation begins it may require user interaction.  This is the largest software upgrade event ever and we’re managing it so everyone has a great experience. We recommend waiting until your PC receives a notification to upgrade, and then following the instructions provided.  Please note that there … Read More

Report Builder Error – The Certificate Chain was issued by an Authority that is not Trusted

Benoit LecoursSCCM, SSRS10 Comments

When editing a SCCM 2012 report in Report Builder you receive the following error : A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 – The certificate chain was issued by an authority that is not trusted.) Cause This error occurs because you don’t have the required SCCM SQL certificate on the computer running Report Builder. Follow the following steps in order to resolve the issue. Export the certificate from your SQL server On the SQL Server Click the Start menu, click Run, and then type mmc. Click Enter. … Read More

Failed to resolve selected task sequence dependencies 0x80040104

Benoit LecoursOSD, SCCM6 Comments

I had to troubleshoot a problem where a Task Sequence return the error Failed to Run Task Sequence. SMSTS.log shows : Failed to resolve selected task sequence dependencies 0x80040104 Not big of a deal, this error oftently occurs. It just means that some package referenced by a task sequence is not distributed to the distribution point. This should be an easy fix… well not in this case. Troubleshooting When reading SMSTS.log we can find the problematic package ID. In this case KR100048 was the bad guy. So I did the basic troubleshooting in those cases : Open the SCCM Console Navigate … Read More

Reporting Point Error after R2 Upgrade

Benoit LecoursSCCM, SSRSLeave a Comment

This post explain how to fix Reporting Point Error after R2 Upgrade. Problem : After upgrading from SCCM 2012 SP1 CU2 to SCCM 2012 R2. You get the following error when running reports : An error has occurred during report processing. (rsProcessingAborted) Cannot read the next data row for the dataset DataSet1. (rsErrorReadingNextDataRow) Conversion failed when converting the nvarchar value ‘S-1-5-21-1010946700-728571707-39459515-134623’ to data type int. Removing and adding the “Reporting Service Role” did not fix the issue. SRSRP.log has Invalid Class errors : Invalid class SMS_SRS_REPORTING_POINT 07/7/2014 1:52:12 PM 6096 (0x17D0) Could not retrieve the reporting service name for instance ‘RPSERVER’ … Read More

Endpoint Protection Policy is not Applied

Benoit LecoursSCCM, SCEP3 Comments

This post explains what to do when Endpoint Protection policy not applied Symptom The policy was applied to a specific collection and all members of the collection were failing to apply the policy Monitoring / Endpoint Protection Status / System Center 2012 R2 Endpoint Protection Status / Operational State 12 clients are failing to apply the custom policy. Clicking on the “Antimalware policy application failed” brings us to the list of machine. On the bottom, clicking on the “Antimalware Policy” tab shows the error : 0x80004005 – Failed to generate Antimalware policy file Let’s look at the EndpointProtectionAgent.log on one of the … Read More

SCCM 2012 Management Point Error 1603

Benoit LecoursPowershell, SCCM2 Comments

We have recently experienced a SCCM 2012 management point error 1603. Scenario : Installing a new MP gives an error 1603 SCCM 2012 R2 Windows 2012 R2 The first thing to check is the MPSetup.log, you can see the error 1603 but you have not much information about what’s the problem really is. You have to dig deeper in the MPMsiLog.LastError to see the root cause.                     As you can see the error is cause by a previous version of the client being installed on the server. My environment had SCCM … Read More

Replication Errors in SCCM 2012 R2 after Upgrading

Benoit LecoursSCCMLeave a Comment

Several customers reported to Microsoft that child primary sites were entering maintenance mode after upgrading the central administration site from System Center 2012 Configuration Manager Service Pack 1 (SP1) with CU2 or CU3 to 2012 R2. Read this post from the SCCM Team blog for all information about this error. In short, there’s a new build available after Nov.14th that will fix the problem for new installation. (The SCCM setup will download the necessary files.) Customer with the problem must run this SQL query (provided from the TN post) : Existing hierarchies that have already upgraded the central administration site but cannot … Read More