Step-by-Step SCCM 2012 R2 SP1 CU3 Installation Guide

Benoit LecoursSCCM16 Comments

Cumulative Update 3 (CU3) for SCCM 2012 R2 SP1 and SCCM 2012 SP2 is now available. This post is a complete step-by-step SCCM 2012 R2 SP1 CU3 Installation guide. If you’re looking for a complete SCCM 2012 installation guide, see our blog series which covers it all. Installing SCCM cumulative updates is very important to your infrastructure. It fix lots of issues, which some of them are important. Microsoft recommends installing Cumulative Updates if you are affected by a resolved issues. If you are not on SCCM 2012 R2 SP1 or SCCM 2012 SP2, the latest CU is Cumulative Update 5. If you are running SCCM 1511, this Cumulative Update is not applicable to your setup. As this is a cumulative update, you don’t have to install prior CU(1-2) before installing CU3. CU3 contains all the fixes included in previous CU. Improvements/Fixes There’s no new major functionality in CU3. This update contains fixes for issues … Read More

Step-by-Step SCCM Installation and Configuration Guide

Benoit LecoursSCCM46 Comments

The new version of SCCM is out ! You may know this version as SCCM Vnext, SCCM 2016 or SCCM 1511. The product group explained on their blog that the new version will be simply called SCCM Current Branch. This blog post is a complete Step-by-step SCCM Installation Guide. SCCM installation has never been an easy process and the product itself can be complex for inexperienced administrators. With these blog posts, our goal is to bring it a bit further, explaining concepts and best practice rather than just guide the user through the installation process. If you’re not familiar with SCCM 1511 Features, you can visit this Technet article which covers it all. If you’re familiar with SCCM 2012 and plans to migrate, read our blog post about What’s New in SCCM 1511 and stop reading this guide. You do not need to do a complete installation if you’re already running SCCM 2012. See our blog post on how … Read More

How to limit SCCM 2012 Pull Distribution Point Bandwidth

Jonathan LefebvreSCCM5 Comments

Pull Distribution point can help reduce the processing load on the site server and can help to speed the transfer of the content to each distribution point. One other need to use Pull Distribution Point could be because you require more than 250 Distribution point from a single Primary site. Using Pull DPs comes with certain limits compared to using a standard DP. In previous post we covered How to manage your Distribution Points with Collections in large environment. Based on those collections, it’s possible to manage network impact while distributing content to Pull DP. This post will explain how limit SCCM 2012 Pull Distribution Point bandwidth. Pull Distribution Point Bandwidth Limitation Differences Rate Limits One of the key feature missing from Pull DP is the ability to use rate limits.  The tab is not even visible for Pull DP properties. To check the Full DP Properties, navigate in your console to Administration / Site Configuration / Servers and Site … Read More

How to install SCCM 2012 Application Catalog

Benoit LecoursSCCM5 Comments

In the first part of this SCCM 2012 and SCCM 1511 blog series, we planned our hierarchy, prepared our SCCM Server and Active Directory. In part 2, we installed and configured SQL in order to install SCCM. In part 3, we installed a stand-alone SCCM Primary site. In the next 16 parts, we will describe how to install the numerous site systems roles available in SCCM 2012 R2 and SCCM 1511. Role installation order is not important, you can install roles independently of others. This part will describe how to install SCCM 2012 Application Catalog web service point and the Application Catalog website point. Role Description The Application Catalog web service point provides software information to the Application Catalog website from the Software Library. The Application Catalog website point provides users with a list of available software. This is not a mandatory site system but you need both the Application Catalog website point and the Application Catalog web … Read More

How to install Endpoint Protection Point in SCCM 2012 R2

Benoit LecoursSCCM8 Comments

In this part of SCCM 2012 and SCCM 1511 blog series, we will describe how to install SCCM 2012 R2 or SCCM 1511 Endpoint Protection Point (EPP). Role Description The Endpoint Protection Point provides the default settings for all antimalware policies and installs the Endpoint Protection client on the Site System server to provide a data source from which the SCCM database resolves malware IDs to names. When you install this Site System Role, you must accept the license terms for System Center 2012 R2 Endpoint Protection. This is not a mandatory Site System but you need to install a EPP if you’re planning to use SCCM as your anti-virus management solution (using Endpoint Protection). Site System Role Placement in Hierarchy This Site System is a hierarchy-wide option. SCCM supports a single instance of this site system role in a hierarchy and only at the top-level site in the hierarchy. It’s supported to install this role on a Central Administration Site … Read More

How to install a Certificate Registration Point in SCCM 2012

Benoit LecoursSCCM3 Comments

In this part of SCCM 2012 and SCCM 1511 blog series, we will describe how to install SCCM 2012 R2 or SCCM 1511 Certificate Registration Point (CRP). Role Description Using SCCM and Intune, the CRP communicates with a server that runs the Network Device Enrollment Service (NDES) to provision device certificate requests. This is not a mandatory Site System but we recommend to install a CRP if you need to provision client certificates to your devices (like VPN or WIFI). Prerequisites Before the CRP can be installed, dependencies outside SCCM is required. I won’t cover the prerequisite configuration in details as they are well documented on this Technet article and it goes beyond SCCM. Here’s an overview of what needs to be done : Install the NDES role on a Windows 2012 R2 Server Modify the security permissions for the certificate templates that the NDES is using Deploy a PKI certificate that supports client authentication Locate … Read More

How to install SCCM 2012 R2 Fallback Status Point

Benoit LecoursSCCM7 Comments

In this part of SCCM 2012 and SCCM 1511 blog series, we will describe how to install SCCM 2012 R2 or SCCM 1511 Fallback Status Point (FSP). Role Description The FSP helps monitor client installation and identify unmanaged clients that cannot communicate with their management point. This is not a mandatory Site System but we recommend to install a FSP for better client management and monitoring. This is the Site System that receive State Message related to client installation, client site assignment, and clients unable to communicate with their HTTPS Management Point. If the FSP is not configured properly you’ll end up having  A fallback status point has not been specified errors in your logs. Site System Role Placement in Hierarchy This Site System is a hierarchy-wide option. It’s supported to install this role on a child Primary Site or stand-alone Primary Site but it’s not supported on a Central Administration site nor Secondary Site. FSP Installation Open the … Read More

Step-by-Step SCCM 2012 R2 Installation Guide

Benoit LecoursSCCM22 Comments

  Download and own part 1 to 18 of the SCCM 2012 R2 Installation Guide in a single PDF file. Use our products page or use the download button below. This blog post won’t be updated, only the document will be. [purchase_link id=”3614″ style=”button” color=”Gray” text=”Guide | SCCM 2012 R2 Installation Guide | Part 1-18″ direct=”true”]   Performing a SCCM 2012 R2 installation is not a walk in the park. The product itself can be complex for inexperienced administrators. There’s already tons of SCCM 2012 R2 Installation Guide available, written by experienced blogger and MVPs but I think that very few gives the whole picture from the start to the last component. Our goal is to bring it a bit further, explaining concepts and best practice rather than just guide the user through the installation process. We was hesitant to post this SCCM 2012 R2 Installation Guide because SCCM VNext is coming pretty fast (Release date could … Read More

Install SCCM 2012 Reporting Services Point

Benoit LecoursSCCM, SQL, SSRS22 Comments

In this part of SCCM 2012 and SCCM 1511 blog series, we will describe how to install a SCCM 2012 or SCCM 1511 reporting services point. This role can be installed on a remote machine, the process is the same but the logs location is different. Requirements Before you can install the reporting services point role you must configure SQL correctly. We’ll be using SQL 2012 on this post. We are assuming that SQL is already installed and that your SCCM site is up and healthy. During the initial SQL installation, you must select Reporting Services. If you have installed SQL Server, but have not installed Reporting Services follow the following steps. If Reporting Services is already installed, skip to the “Configure Reporting Services” section. Launch the SQL Server 2012 installation from the media. Click the Installation link on the left to view the Installation options. Click the top link, New SQL Server stand-alone … Read More